This set consists of a single cutting jig and 10 adapter rings which will accept a 20mm square base trimmed with the included jig.
These adapter rings are 3d printed to a high standard in premium black matte PLA.
The outer diameter of the ring is the same as a standard GW 25mm base.
Miniatures pictured are not included, and are for illustrative purposes only.
It is recommended to use side cutters to trim the base flush with the jig. If this is not possible (for example, due to part of the model overhanging the part to be trimmed) then knife or saw work may be required.
If the original base is a slotta and is not glued to both sides of the model’s tab, it is possible that half may come loose when trimmed. Simply glue the loose part into the adapter ring first before fitting the remaining portion.
Designs are under constant revision and improvement. As such, the product may vary slightly from pictured.